Subplate-mounted hydraulic valve – Page 4 – Hydraulic valves manufacturer -Rekith Hydraulics

Categories

Subplate-mounted hydraulic valve

Directional Valve

Hydraulic Check Valves

Spool Directional Valves

Solenoid Operated Poppet Valves

Explosion-proof Solenoid Directional Valves

G-WEH/WH...4XJ/6XJ

Pressure Relief Valves

Pressure Reducing Valves

Pressure Sequence Valves

Flow Control Valve

Proportional Valve

Proportional directional valve

Proportional relief valve

Proportional reducing valve

Proportional flow control valve

Pressure switch

Directional function

Pressure function

Spool Position monitoring function

Threaded cartridge valve

Directional Valve

Pilot-Operated Check Valve

Directional Valve

Flow Control Valve

Pressure Valves

Pressure Reducing

Counterbalance Valve

JCBCA/JCBCB/JCBCY

JCBCG/JCBCH/JCBCL

JCBEA/JCBEB/JCBEY

Proportional Valve

WRPEHCBL XJGKAM

Size 6
Maximum working pressure 315 bar
Maximum working flow 40 L/min
Direct operated servo solenoid valve with control piston and valve sleeve, with servo performanceOperated on one side, 4/4-fail-safeposition in switched-off condition
Control solenoid with built-in position feedback and integrated amplifier board (OBE), calibrated inthe factory
Electrical connection 6P+PE signal input differential amplifier with interface A1 (± 10V) or interface F1(4… 20mA) (RS200 Ω)
Electro-hydraulic controllers for production and testing systems
Subplate mounting

FREB XJQR

Size 10, 16
Maximum working pressure 315bar
Maximum working flow 160 L/min
With pressure compensation for the pressure compensated control a flow
Operation by proportional solenoid
With electrical position feedback of control throttler
The position transducer coil is axially adjusted to make the zero position adjustment of the throttle port easy (electrical, hydraulic) without the need to adjust the electronics
Minimum sample variation of valve 2FRE and proportional amplifiers

DREM Proportional valve

Size 10/25
Maximum working pressure 315bar
Maximum working flow 300 L/min
Maximum pressure protection, optional
Optional check valve for freely flow of oil in reverse direction
For subplate mounting
For installation in manifolds
Both valves and proportional amplifiers from the same supplier

DREPEC Proportional valve

Size 6
Maximum working pressure 100 bar
Maximum working flow 15 L/min
Direct operated proportional valves for the control of the pressure and direction of a flow
Operation by proportional solenoid with central thread and detachable coil
For subplate mounting
Spring centred control spool
Model 3DREPE with integrated amplifier
Model 3DREP with external amplifier
Manual emergency operation, optional

ZDBEVP XJGK

Size 6
Maximum working pressure 315bar
Maximum working flow 30 L/min
For limiting system pressure
Operation by proportional solenoids
Subplate mounting or sandwich plate connection
Both valves and proportional amplifiers from the same supplier
Model DBEE and ZDBEE withi ntegrated amplifier:
Low manufacturing tolerance of the command value-pressure
characteristic curve
The ramp signal generation time can be adjusted separately when the pressure increases or decreases

DBETR XJGKM

Size 6
Maximum working pressure 350 bar
Maximum working flow 3 L/min
Low hysteresis
Good repeatability
Electrical closed loop position control of spring pre-tension
Both valves and proportional amplifiers from the same supplier

Based on Jiangsu, Jiayite follows the pace of internationalization and heads towards the world.

Product Categories

Get Free Estimate

quick links

© 2026 Jiangsu Jiayite Hydraulics Co., Ltd All rights reserved.

REKITH and LANDER are registered brands fully owned and operated by Jiangsu Jiayite Hydraulics Co., Ltd.

→
0086-517-88299106
[email protected]
Address: No. 9 Jinyuan Road, Xuyi County Industrial Park, Huaian City, Jiangsu Province