Products
Categories
Direct Operated Pressure Reducing Valve DR5DP | Size 5, 315 Bar, 15 L/min
- Size 5
- Maximum working pressure 315 bar
- Maximum working flow 15 L/min
- Mounting surface according to DIN 24340 form C
- Subplate mounting
- Panel mounting
- 5 pressure ratings
- 3 adjustment elements
- Check valve, optiona
Two Ways Flow Control Valve 2FRM5…3XJ | Size 5, 210 Bar, 15 L/min
- Size 5
- Maximum working pressure 210 bar
- Maximum working flow 15 L/min
- Optional pressure compensator stroke limiter
- Start-up jump reduction
- Lockable knob
- Flow control in both directionby means of rectifier sandwich plate
Two Ways Flow Control Valve 2FRM6…3XJ | Size 6, 315 Bar, 32 L/min
- Size 6
- Maximum working pressure 315 bar
- Maximum working flow 32 L/min
- Optional pressure compensator closed externally
- Subplate mounting
- Optional check valve
- Rotary knob with scale
- Optional lock
Modular Restrictive Check Valve Z2FS10…3XJ | Size 10, 315 Bar, 160 L/min
- Size 10
- Maximum working pressure 315 bar
- Maximum working flow 160 L/min
- Modular type valve
- 3 types of adjustment elements-Adjusting screw with inner hexagonallocknut and protective cap-Lockable knob with scale -Rotary knob with scale
- Used to limit the main flow or control flow of two working oil ports
- Used for meter-in or meter-out contro
Balanced Valve FD…1XJ | Load Holding Valve, 315 Bar, Up to 560 L/min
- Size 12/16/25/32
- Maximum working pressure 315 bar
- Maximum working flow 560 L/min
- Pilot operated check valve no leakage
- The balanced valve controls the return flow Q2 according to the flow Q1 on the opposite side of the actuator
- With cylinders the area ratio (Q2=Q1φ) must be considered
- By-pass valve, flow freely in the opposite direction
- External superimposed secondary pressure relief valve (for flange connection only)
Explosion-proof Electro-hydraulic Directional Valve G-WEH | Size 10–32, 350 Bar
- Size 10~32
- Maximum working pressure 350 bar
- Maximum working flow 1100 L/min
- Mainly used to control the opening closing and flow direction of liquid flow
- Subplate mounting The mounting surface according to DIN24340 form A and ISO4401
- Spring or hydraulic centered Spring or hydraulic return to initial position
- Explosion-proof solenoid
- Optional switching time adjustment
- Optional pre-load valve in port P of the main valve